In production process, vibration feeder is used to feed the block, granule and powder material from the storage bin or funnel uniformly continuously or quantitatively to the material affected device. Feeding capacity can be adjusted according to the requirement, to achieve the control of production processes and automation. It can feed materials to belt conveyor, bucket elevator, screening equipment, crusher, mill, etc., as well as for automatic batching and quantitative packaging, and can be used to the flow of automated control and achieve the automation of production processes.  

Be widely used in crushing, sieving joint device of metallurgy, coal, mineral processing, building materials, chemical, abrasive and other industries.

ZSW series vibration feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts.Shoes gears are interlocked along the mark. The two eccentric shafts rotate drove by the motor to produce a centrifugal force and force the feeder to vibrate. The materials will slip, sling on the chute drove by the vibration and move forward. When the materials pass the screening parts, small size materials will fall down and achieve the screening purpose.

Simple structure, uniform feeding, continuous performance, adjustable exciting force; changeable and controllable flow rate, easy operation; eccentric block is the source of vibration, low noise, low power consumption, good regulation performance, the usage of a closed body can prevent dust pollution, smooth vibration, reliable operation and long service life, adjustable exciting force, changeable and controllable flow rate, convenient and steady adjustment; vibration motor is excitation source, low noise, low power consumption, good adjustment performance,no red material phenomena.Simple structure,reliable operation,easy adjustment and installation,light weight, small size, easy maintenance and it can prevent dust pollution when using a closed structure.

Structure feature:structure of vibrating feeders is simple, easy to operate, without lubrication, small power consumption; you can evenly adjust the volume of the mine; therefore it has been widely used.It is generally used for loose materials. According to requirements of equipment performance, configuration should be designed to minimize the pressure of materials on the tank.Accroding to requirements of manufacturers, the effective discharging opening of storage is no larger than a quarter of slot width, the material flow speed is controlled in 6-18 m/min.To materials of larger feeding amount, hopper bottom of the nesting department should set high enough mining bar board; to not affect the performance of feeder, bar mine plate can not be fixed to the tank body. To enable silo to discharge smoothly, silo wall is better to be designed to dip 55-65 degrees.